+++ /dev/null
-
-- name: width
- type: Integer
- default: 480
- desc: Width, in pixels, of the chart. If the container div has been explicitly sized, this will be
- ignored.
- category: Overall display
- tags:
- - overall display
- examples:
- - linear-regression-addseries
- - annotation
- - century-scale
- - color-visibility
- - daylight-savings
- - demo
- - drawing
- - independent-series
- - link-interaction
- - linear-regression-fractions
- - linear-regression
- - no-range
- - small-range-zero
- - reverse-y-axis
- - color-cycle
- - multi-scale
- - value-axis-formatters
-
-- name: height
- type: Integer
- default: 320
- desc: Height, in pixels, of the chart. If the container div has been explicitly sized, this will be
- ignored.
- category: Overall display
- tags:
- - overall display
- examples:
- - annotation
- - century-scale
- - color-visibility
- - demo
- - drawing
- - link-interaction
- - no-range
- - small-range-zero
- - reverse-y-axis
- - color-cycle
- - multi-scale
- - value-axis-formatters
-
-- name: annotationClickHandler
- type: function(annotation, point, dygraph, event)
- default: null
- desc: If provided, this function is called whenever the user clicks on an annotation.
- category: Annotations
- tags:
- - annotations
- - handler
- examples:
- - annotation
-
-- name: annotationDblClickHandler
- type: function(annotation, point, dygraph, event)
- default: null
- desc: If provided, this function is called whenever the user double-clicks on an annotation.
- category: Annotations
- tags:
- - annotations
- - handler
- examples:
- - annotation
-
-- name: annotationMouseOutHandler
- type: function(annotation, point, dygraph, event)
- default: null
- desc: If provided, this function is called whenever the user mouses out of an annotation.
- category: Annotations
- tags:
- - annotations
- - handler
- examples:
- - annotation
-
-- name: annotationMouseOverHandler
- type: function(annotation, point, dygraph, event)
- default: null
- desc: If provided, this function is called whenever the user mouses over an annotation.
- category: Annotations
- tags:
- - annotations
- - handler
- examples:
- - annotation
-
-- name: displayAnnotations
- type: Boolean
- default: false
- desc: Only applies when Dygraphs is used as a GViz chart. Causes string columns following a data series
- to be interpreted as annotations on points in that series. This is the same format used by Google's
- AnnotatedTimeLine chart.
- category: Annotations
- tags:
- - annotations
- examples:
- - annotation-gviz
-
-- name: avoidMinZero
- type: Boolean
- default: false
- desc: "When set, the heuristic that fixes the Y axis at zero for a data set with the minimum Y value\
- \ of zero is disabled. \nThis is particularly useful for data sets that contain many zero values,\
- \ especially for step plots which may otherwise have lines not visible running along the bottom\
- \ axis."
- category: Axes
- tags:
- - axes
- examples:
- - avoidMinZero
-
-- name: axis
- type: String or Object
- default: null
- desc: Set to either an object ({}) filled with options for this axis or to the name of an existing
- data series with its own axis to re-use that axis. See tests for usage.
- category: Axes
- tags:
- - axes
- examples:
- - two-axes
- - steps
- - two-axes-vr
- - value-axis-formatters
-
-- name: axisLabelColor
- type: String
- default: black
- desc: Color for x- and y-axis labels. This is a CSS color string.
- category: Axes
- tags:
- - axes
-
-- name: axisLabelFontSize
- type: Integer
- default: 14
- desc: Size of the font (in pixels) to use in the axis labels, both x- and y-axis.
- category: Axes
- tags:
- - axes
-
-- name: axisLabelFormatter
- type: function(number or Date, granularity, opts, dygraph)
- default: null
- desc: Function to call to format the tick values that appear along an axis. This is usually set on
- a per-axis basis. The first parameter is either a number (for a numeric axis) or a Date object
- (for a date axis). The second argument specifies how fine-grained the axis is. For date axes,
- this is a reference to the time granularity enumeration, defined in dygraph-tickers.js, e.g. Dygraph.WEEKLY.
- opts is a function which provides access to various options on the dygraph, e.g. opts('labelsKMB').
- category: Axes
- tags:
- - axes
- examples:
- - x-axis-formatter
- - y-axis-formatter
- - value-axis-formatters
-
-- name: axisLabelWidth
- type: Integer
- default: 50
- desc: Width (in pixels) of the containing divs for x- and y-axis labels. For the y-axis, this also
- controls
- category: Axes
- tags:
- - axes
- - labels
-
-- name: axisLineColor
- type: String
- default: black
- desc: Color of the x- and y-axis lines. Accepts any value which the HTML canvas strokeStyle attribute
- understands, e.g. 'black' or 'rgb(0, 100, 255)'.
- category: Axes
- tags:
- - axes
- examples:
- - demo
-
-- name: axisLineWidth
- type: Float
- default: 0.3
- desc: Thickness (in pixels) of the x- and y-axis lines.
- category: Axes
- tags:
- - axes
-
-- name: axisTickSize
- type: Number
- default: '3.0'
- desc: The size of the line to display next to each tick mark on x- or y-axes.
- category: Axes
- tags:
- - axes
-
-- name: dateWindow
- type: Array of two Dates or numbers
- default: null
- desc: Initially zoom in on a section of the graph. Is of the form [earliest, latest], where earliest/latest
- are milliseconds since epoch. If the data for the x-axis is numeric, the values in dateWindow
- must also be numbers. By default, the full range of the input is shown.
- category: Axes
- tags:
- - axes
- examples:
- - dateWindow
- - drawing
- - is-zoomed-ignore-programmatic-zoom
- - link-interaction
- - synchronize
- - zoom
-
-- name: drawXAxis
- type: Boolean
- default: true
- desc: Whether to draw the x-axis. Setting this to false also prevents x-axis ticks from being drawn
- and reclaims the space for the chart grid/lines.
- category: Axes
- tags:
- - axes
- examples:
- - unboxed-spark
-
-- name: drawYAxis
- type: Boolean
- default: true
- desc: Whether to draw the y-axis. Setting this to false also prevents y-axis ticks from being drawn
- and reclaims the space for the chart grid/lines.
- category: Axes
- tags:
- - axes
- examples:
- - drawing
- - unboxed-spark
-
-- name: includeZero
- type: Boolean
- default: false
- desc: Usually, dygraphs will use the range of the data plus some padding to set the range of the y-axis.
- If this option is set, the y-axis will always include zero, typically as the lowest value. This
- can be used to avoid exaggerating the variance in the data
- category: Axes
- tags:
- - axes
- examples:
- - no-range
- - numeric-gviz
- - small-range-zero
-
-- name: logscale
- type: Boolean
- default: false
- desc: When set for a y-axis, the graph shows that axis in log scale. Any values less than or equal
- to zero are not displayed. Not compatible with showZero, and ignores connectSeparatedPoints.
- Also, showing log scale with valueRanges that are less than zero will result in an unviewable graph.
- category: Axes
- tags:
- - axes
- examples:
- - logscale
- - stock
-
-- name: panEdgeFraction
- type: Float
- default: null
- desc: A value representing the farthest a graph may be panned, in percent of the display. For example,
- a value of 0.1 means that the graph can only be panned 10% pased the edges of the displayed values.
- null means no bounds.
- category: Axes
- tags:
- - axes
- - interactive elements
- examples:
- - zoom
-
-- name: pixelsPerLabel
- type: Integer
- default: null
- desc: Number of pixels to require between each x- and y-label. Larger values will yield a sparser
- axis with fewer ticks. This is set on a per-axis basis. By default, values are 60 (x-axis) or 30 (y-axes).
- category: Axes
- tags:
- - axes
- - grid
- examples:
- - value-axis-formatters
-
-- name: ticker
- type: "function(min, max, pixels, opts, dygraph, vals) -> [{v: ..., label: ...}, ...]"
- default: null
- desc: This lets you specify an arbitrary function to generate tick marks on an axis. The tick marks
- are an array of (value, label) pairs. The built-in functions go to great lengths to choose good
- tick marks so, if you set this option, you'll most likely want to call one of them and modify
- the result. By default, uses Dygraph.dateTicker or Dygraph.numericTicks, but see
- dygraph-tickers.js for an extensive discussion. This is set on a per-axis basis.
- category: Axes
- tags:
- - axes
-
-- name: valueRange
- type: Array of two numbers
- default: null
- desc: Explicitly set the vertical range of the graph to [low, high]. This may be set on a per-axis
- basis to define each y-axis separately. By default, the full range of the input is shown.
- category: Axes
- tags:
- - axes
- examples:
- - drawing
- - dynamic-update
- - is-zoomed-ignore-programmatic-zoom
- - no-visibility
- - reverse-y-axis
- - synchronize
- - zoom
- - two-axes-vr
-
-- name: xAxisHeight
- type: Integer
- default: null
- desc: Height, in pixels, of the x-axis. If not set explicitly, this is computed based on axisLabelFontSize
- and axisTickSize.
- category: Axes
- tags:
- - axes
-
-- name: xAxisLabelWidth
- type: Integer
- default: 50
- desc: Width, in pixels, of the x-axis labels.
- category: Axes
- tags:
- - axes
- examples:
- - x-axis-formatter
- - value-axis-formatters
-
-- name: yAxisLabelWidth
- type: Integer
- default: 50
- desc: Width, in pixels, of the y-axis labels. This also affects the amount of space available for
- a y-axis chart label.
- category: Axes
- tags:
- - axes
- examples:
- - customLabel
- - two-axes
- - multi-scale
- - two-axes-vr
- - value-axis-formatters
-
-- name: delimiter
- type: String
- default: ','
- desc: The delimiter to look for when separating fields of a CSV file. Setting this to a tab is not
- usually necessary, since tab-delimited data is auto-detected.
- category: CSV parsing
- tags:
- - csv parsing
-
-- name: xValueParser
- type: function(str) -> number
- default: null
- desc: A function which parses x-values (i.e. the dependent series). Must return a number, even when
- the values are dates. In this case, millis since epoch are used. This is used primarily for parsing
- CSV data. *=Dygraphs is slightly more accepting in the dates which it will parse. See code for
- details.
- category: CSV parsing
- tags:
- - csv parsing
-
-- name: clickCallback
- type: function(e, x, points)
- default: null
- desc: "A function to call when the canvas is clicked. The function should take three arguments, the\
- \ event object for the click, the x-value that was clicked (for dates this is millis since epoch),\
- \ and the closest points along that date. The points have these properties:\n * xval/yval: The\
- \ data coordinates of the point (with dates/times as millis since epoch) \n * canvasx/canvasy:\
- \ The canvas coordinates at which the point is drawn. \n name: The name of the data series to\
- \ which the point belongs"
- category: Callbacks
- tags:
- - callbacks
- examples:
- - callback
-
-- name: drawCallback
- type: function(dygraph, is_initial)
- default: null
- desc: When set, this callback gets called every time the dygraph is drawn. This includes the initial
- draw, after zooming and repeatedly while panning. The first parameter is the dygraph being drawn.
- The second is a boolean value indicating whether this is the initial draw.
- category: Callbacks
- tags:
- - callbacks
- examples:
- - linear-regression-addseries
- - annotation
- - callback
- - is-zoomed
- - is-zoomed-ignore-programmatic-zoom
- - synchronize
- - zoom
-
-- name: highlightCallback
- type: function(event, x, points,row)
- default: null
- desc: 'When set, this callback gets called every time a new point is highlighted. The parameters are
- the JavaScript mousemove event, the x-coordinate of the highlighted points and an array of highlighted
- points: [ {name: ''series'', yval: y-value}, ... ]'
- category: Callbacks
- tags:
- - callbacks
- examples:
- - callback
- - crosshair
-
-- name: underlayCallback
- type: function(canvas, area, dygraph)
- default: null
- desc: When set, this callback gets called before the chart is drawn. It details on how to use this.
- category: Callbacks
- tags:
- - callbacks
- examples:
- - highlighted-region
- - interaction
- - linear-regression-fractions
- - linear-regression
- - underlay-callback
-
-- name: unhighlightCallback
- type: function(event)
- default: null
- desc: When set, this callback gets called every time the user stops highlighting any point by mousing
- out of the graph. The parameter is the mouseout event.
- category: Callbacks
- tags:
- - callbacks
- examples:
- - callback
- - crosshair
-
-- name: zoomCallback
- type: function(minDate, maxDate, yRanges)
- default: null
- desc: A function to call when the zoom window is changed (either by zooming in or out). minDate and
- maxDate are milliseconds since epoch. yRanges is an array of [bottom, top] pairs, one for each
- y-axis.
- category: Callbacks
- tags:
- - callbacks
- examples:
- - callback
- - is-zoomed-ignore-programmatic-zoom
- - zoom
-
-- name: title
- type: String
- default: null
- desc: Text to display above the chart. You can supply any HTML for this value, not just text. If you
- wish to style it using CSS, use the 'dygraph-label' or 'dygraph-title' classes.
- category: Chart labels
- tags:
- - chart labels
- examples:
- - border
- - demo
- - noise
- - styled-chart-labels
- - multi-scale
- - range-selector
- - temperature-sf-ny
-
-- name: titleHeight
- type: Integer
- default: 18
- desc: Height of the chart title, in pixels. This also controls the default font size of the title.
- If you style the title on your own, this controls how much space is set aside above the chart
- for the title's div.
- category: Chart labels
- tags:
- - chart labels
- examples:
- - styled-chart-labels
-
-- name: xLabelHeight
- type: Integer
- default: 18
- desc: Height of the x-axis label, in pixels. This also controls the default font size of the x-axis
- label. If you style the label on your own, this controls how much space is set aside below the
- chart for the x-axis label's div.
- category: Chart labels
- tags:
- - chart labels
-
-- name: xlabel
- type: String
- default: null
- desc: Text to display below the chart's x-axis. You can supply any HTML for this value, not just text.
- If you wish to style it using CSS, use the 'dygraph-label' or 'dygraph-xlabel' classes.
- category: Chart labels
- tags:
- - chart labels
- examples:
- - border
- - demo
- - styled-chart-labels
- - multi-scale
-
-- name: y2label
- type: String
- default: null
- desc: Text to display to the right of the chart's secondary y-axis. This label is only displayed if
- a secondary y-axis is present. See this test for an example of how to do this. The comments for
- the 'ylabel' option generally apply here as well. This label gets a 'dygraph-y2label' instead
- of a 'dygraph-ylabel' class.
- category: Chart labels
- tags:
- - chart labels
- examples:
- - two-axes
- - two-axes-vr
-
-- name: yLabelWidth
- type: Integer
- default: 18
- desc: Width of the div which contains the y-axis label. Since the y-axis label appears rotated 90
- degrees, this actually affects the height of its div.
- category: Chart labels
- tags:
- - chart labels
-
-- name: ylabel
- type: String
- default: null
- desc: Text to display to the left of the chart's y-axis. You can supply any HTML for this value, not
- just text. If you wish to style it using CSS, use the 'dygraph-label' or 'dygraph-ylabel' classes.
- The text will be rotated 90 degrees by default, so CSS rules may behave in unintuitive ways. No
- additional space is set aside for a y-axis label. If you need more space, increase the width of
- the y-axis tick labels using the yAxisLabelWidth option. If you need a wider div for the y-axis
- label, either style it that way with CSS (but remember that it's rotated, so width is controlled
- by the 'height' property) or set the yLabelWidth option.
- category: Chart labels
- tags:
- - chart labels
- examples:
- - border
- - demo
- - two-axes
- - noise
- - styled-chart-labels
- - multi-scale
- - range-selector
- - temperature-sf-ny
- - two-axes-vr
-
-- name: file
- type: String (URL of CSV or CSV), GViz DataTable or 2D Array
- default: null
- desc: Sets the data being displayed in the chart. This can only be set when calling updateOptions;
- it cannot be set from the constructor. For a full description of valid data formats, see the Data
- Formats page.
- category: Data
- tags:
- - data
- examples:
- - drawing
- - dygraph-many-points-benchmark
-
-- name: connectSeparatedPoints
- type: Boolean
- default: false
- desc: Usually, when Dygraphs encounters a missing value in a data series, it interprets this as a
- gap and draws it as such. If, instead, the missing values represents an x-value for which only
- a different series has data, then you'll want to connect the dots by setting this to true. To
- explicitly include a gap with this option set, use a value of NaN.
- category: Data Line display
- tags:
- - data line display
- examples:
- - connect-separated
- - independent-series
-
-- name: drawPoints
- type: Boolean
- default: false
- desc: Draw a small dot at each point, in addition to a line going through the point. This makes the
- individual data points easier to see, but can increase visual clutter in the chart.
- category: Data Line display
- tags:
- - data line display
- examples:
- - linear-regression-addseries
- - draw-points
- - dynamic-update
- - independent-series
- - interaction
- - linear-regression-fractions
- - linear-regression
- - per-series
-
-- name: fillGraph
- type: Boolean
- default: false
- desc: Should the area underneath the graph be filled? This option is not compatible with error bars.
- category: Data Line display
- tags:
- - data line display
- examples:
- - fillGraph
- - two-axes
- - steps
-
-- name: pointSize
- type: Integer
- default: 1
- desc: The size of the dot to draw on each point in pixels (see drawPoints). A dot is always drawn
- when a point is "isolated", i.e. there is a missing point on either side of it. This also controls
- the size of those dots.
- category: Data Line display
- tags:
- - data line display
- examples:
- - per-series
-
-- name: stackedGraph
- type: Boolean
- default: false
- desc: If set, stack series on top of one another rather than drawing them independently.
- category: Data Line display
- tags:
- - data line display
- examples:
- - stacked
-
-- name: stepPlot
- type: Boolean
- default: false
- desc: When set, display the graph as a step plot instead of a line plot.
- category: Data Line display
- tags:
- - data line display
- examples:
- - avoidMinZero
- - steps
- - y-axis-formatter
-
-- name: strokePattern
- type: Array
- default: null
- desc: A custom pattern array where the even index is a draw and odd is a space in pixels. If null
- then it draws a solid line. The array should have a even length as any odd lengthed array could
- be expressed as a smaller even length array.
- category: Data Line display
- tags:
- - data line display
- examples:
- - per-series
-
-- name: strokeWidth
- type: Integer
- default: 1
- desc: The width of the lines connecting data points. This can be used to increase the contrast or
- some graphs.
- category: Data Line display
- tags:
- - data line display
- examples:
- - linear-regression-addseries
- - drawing
- - grid_dot
- - layout-options
- - linear-regression-fractions
- - linear-regression
- - per-series
- - unboxed-spark
- - styled-chart-labels
-
-- name: visibility
- type: Array of booleans
- default: true
- desc: Which series should initially be visible? Once the Dygraph has been constructed, you can access
- and modify the visibility of each series using the visibility and setVisibility methods.
- category: Data Line display
- tags:
- - data line display
- examples:
- - color-visibility
- - no-visibility
- - visibility
-
-- name: colorSaturation
- type: Float (0.0 - 1.0)
- default: 1.0
- desc: If colors is not specified, saturation of the automatically-generated data series colors.
- category: Data Series Colors
- tags:
- - data series colors
-
-- name: colorValue
- type: Float (0.0 - 1.0)
- default: 1.0
- desc: If colors is not specified, value of the data series colors, as in hue/saturation/value. (0.0-1.0,
- default 0.5)
- category: Data Series Colors
- tags:
- - data series colors
-
-- name: colors
- type: Array
- default: null
- desc: List of colors for the data series. These can be of the form "#AABBCC" or "rgb(255,100,200)"
- or "yellow", etc. If not specified, equally-spaced points around a color wheel are used.
- category: Data Series Colors
- tags:
- - data series colors
- examples:
- - century-scale
- - color-visibility
- - demo
- - reverse-y-axis
- - color-cycle
-
-- name: fillAlpha
- type: Float (0.0 - 1.0)
- default: 0.15
- desc: Error bars (or custom bars) for each series are drawn in the same color as the series, but with
- partial transparency. This sets the transparency. A value of 0.0 means that the error bars will
- not be drawn, whereas a value of 1.0 means that the error bars will be as dark as the line for
- the series itself. This can be used to produce chart lines whose thickness varies at each point.
- category: Data Series Colors
- tags:
- - data series colors
- - error bars
-
-- name: timingName
- type: String
- default: null
- desc: Set this option to log timing information. The value of the option will be logged along with
- the timimg, so that you can distinguish multiple dygraphs on the same page.
- category: Debugging
- tags:
- - debugging
- examples:
- - dygraph-many-points-benchmark
-
-- name: pixelsPerXLabel
- type: Integer
- default: null
- desc: 'Prefer axes { x: { pixelsPerLabel } }'
- category: Deprecated
- tags:
- - deprecated
-
-- name: pixelsPerYLabel
- type: Integer
- default: null
- desc: 'Prefer axes: { y: { pixelsPerLabel } }'
- category: Deprecated
- tags:
- - deprecated
- examples:
- - spacing
-
-- name: xAxisLabelFormatter
- type: function
- default: null
- desc: 'Prefer axes { x: { axisLabelFormatter } }'
- category: Deprecated
- tags:
- - deprecated
-
-- name: xValueFormatter
- type: function
- default: null
- desc: 'Prefer axes: { x: { valueFormatter } }'
- category: Deprecated
- tags:
- - deprecated
-
-- name: yAxisLabelFormatter
- type: function
- default: null
- desc: 'Prefer axes: { y: { axisLabelFormatter } }'
- category: Deprecated
- tags:
- - deprecated
-
-- name: yValueFormatter
- type: function
- default: null
- desc: 'Prefer axes: { y: { valueFormatter } }'
- category: Deprecated
- tags:
- - deprecated
- examples:
- - labelsKMB
- - multi-scale
-
-- name: customBars
- type: Boolean
- default: false
- desc: When set, parse each CSV cell as "low;middle;high". Error bars will be drawn for each point
- between low and high, with the series itself going through middle.
- category: Error Bars
- tags:
- - error bar
- - bars
- - csv
- - parsing
- examples:
- - custom-bars
- - zero-series
- - stock
- - range-selector
- - temperature-sf-ny
-
-- name: errorBars
- type: Boolean
- default: false
- desc: Does the data contain standard deviations? Setting this to true alters the input format (see
- above).
- category: Error Bars
- tags:
- - error bars
- - bars
- - csv parsing
- - csv
- - parsing
- examples:
- - callback
- - crosshair
- - custom-bars
- - customLabel
- - draw-points
- - fillGraph
- - fractions
- - grid_dot
- - interaction
- - is-zoomed-ignore-programmatic-zoom
- - link-interaction
- - linear-regression-fractions
- - missing-data
- - resize
- - no-visibility
- - noise
- - numeric-gviz
- - perf
- - steps
- - synchronize
- - underlay-callback
- - visibility
- - zoom
-
-- name: fractions
- type: Boolean
- default: false
- desc: When set, attempt to parse each cell in the CSV file as "a/b", where a and b are integers. The
- ratio will be plotted. This allows computation of Wilson confidence intervals (see below).
- category: Error Bars
- tags:
- - error bars
- - bars
- - csv parsing
- - csv
- - parsing
- examples:
- - fractions
- - linear-regression-fractions
-
-- name: sigma
- type: Float
- default: 2.0
- desc: When errorBars is set, shade this many standard deviations above/below each point.
- category: Error Bars
- tags:
- - error bars
-
-- name: wilsonInterval
- type: Boolean
- default: true
- desc: Use in conjunction with the "fractions" option. Instead of plotting +/- N standard deviations,
- dygraphs will compute a Wilson confidence interval and plot that. This has more reasonable behavior
- for ratios close to 0 or 1.
- category: Error Bars
- tags:
- - error bars
-
-- name: drawXGrid
- type: Boolean
- default: true
- desc: Whether to display vertical gridlines under the chart.
- category: Grid
- tags:
- - grid
- examples:
- - demo
- - unboxed-spark
-
-- name: drawYGrid
- type: Boolean
- default: true
- desc: Whether to display horizontal gridlines under the chart.
- category: Grid
- tags:
- - grid
- examples:
- - drawing
- - unboxed-spark
-
-- name: gridLineColor
- type: String
- default: rgb(128,128,128)
- desc: The color of the gridlines. This can be of the form "#AABBCC" or "rgb(255,100,200)" or "yellow".
- category: Grid
- tags:
- - grid
- examples:
- - drawing
- - grid_dot
-
-- name: gridLineWidth
- type: Float
- default: 0.3
- desc: Thickness (in pixels) of the gridlines drawn under the chart. The vertical/horizontal gridlines
- can be turned off entirely by using the drawXGrid and drawYGrid options.
- category: Grid
- tags:
- - grid
-
-- name: animatedZooms
- type: Boolean
- default: false
- desc: Set this option to animate the transition between zoom windows. Applies to programmatic and
- interactive zooms. Note that if you also set a drawCallback, it will be called several times on
- each zoom. If you set a zoomCallback, it will only be called after the animation is complete.
- category: Interactive Elements
- tags:
- - interactive elements
- examples:
- - highlighted-region
- - link-interaction
-
-- name: highlightCircleSize
- type: Integer
- default: 3
- desc: The size in pixels of the dot drawn over highlighted points.
- category: Interactive Elements
- tags:
- - interactive elements
- examples:
- - dygraph-many-points-benchmark
- - grid_dot
- - per-series
- - unboxed-spark
-
-- name: interactionModel
- hidden: true
- type: Object
- default: null
- desc: 'TODO(konigsberg): document this'
- category: Interactive Elements
- tags:
- - interactive elements
- examples:
- - drawing
- - interaction
-
-- name: pointClickCallback
- type: function(e, point)
- default: null
- desc: "A function to call when a data point is clicked. The function should take two arguments, the\
- \ event object for the click, and the point that was clicked. The 'point' argument has these properties:\n\
- \ * xval/yval: The data coordinates of the point (with dates/times as millis since epoch) \n *\
- \ canvasx/canvasy: The canvas coordinates at which the point is drawn. \n name: The name of the\
- \ data series to which the point belongs"
- category: Interactive Elements
- tags:
- - interactive elements
- - callback
- examples:
- - annotation
- - callback
-
-- name: rangeSelectorHeight
- type: Integer
- default: 40
- desc: Height, in pixels, of the range selector widget. This option can only be specified at Dygraph
- creation time.
- category: Interactive Elements
- tags:
- - interactive elements
- examples:
- - range-selector
-
-- name: rangeSelectorPlotFillColor
- type: String
- default: '#A7B1C4'
- desc: The range selector mini plot fill color. This can be of the form "#AABBCC" or "rgb(255,100,200)"
- or "yellow". You can also specify null or "" to turn off fill.
- category: Interactive Elements
- tags:
- - interactive elements
- examples:
- - range-selector
-
-- name: rangeSelectorPlotStrokeColor
- type: String
- default: '#808FAB'
- desc: The range selector mini plot stroke color. This can be of the form "#AABBCC" or "rgb(255,100,200)"
- or "yellow". You can also specify null or "" to turn off stroke.
- category: Interactive Elements
- tags:
- - interactive elements
- examples:
- - range-selector
-
-- name: showRangeSelector
- type: Boolean
- default: false
- desc: Show the range selector widget. This option can only be specified at Dygraph creation time.
- category: Interactive Elements
- tags:
- - interactive elements
- examples:
- - range-selector
-
-- name: hideOverlayOnMouseOut
- type: Boolean
- default: true
- desc: Whether to hide the legend when the mouse leaves the chart area.
- category: Legend
- tags:
- - legend
- - interactive elements
- examples:
- - gviz-selection
-
-- name: labels
- type: Array
- default: null
- desc: A name for each data series, including the independent (X) series. For CSV files and DataTable
- objections, this is determined by context. For raw data, this must be specified. If it is not,
- default values are supplied and a warning is logged. By default, labels roughly follow
- ["X", "Y1", "Y2", ...]*
- category: Legend
- tags:
- - legend
- examples:
- - linear-regression-addseries
- - connect-separated
- - drawing
- - dygraph
- - dygraph-many-points-benchmark
- - dynamic-update
- - highlighted-region
- - independent-series
- - isolated-points
- - label-div
- - link-interaction
- - linear-regression
- - negative
- - missing-data
- - native-format
- - two-axes
- - perf
- - small-range-zero
- - steps
- - y-axis-formatter
- - annotation-native
- - multi-scale
- - two-axes-vr
- - value-axis-formatters
-
-- name: labelsDiv
- type: DOM element or string
- default: null
- desc: Show data labels in an external div, rather than on the graph. This value can either be a div
- element or a div id.
- category: Legend
- tags:
- - legend
- examples:
- - century-scale
- - demo
- - label-div
- - reverse-y-axis
- - unboxed-spark
-
-- name: labelsDivStyles
- type: Object
- default: null
- desc: 'Additional styles to apply to the currently-highlighted points div. For example, { ''font-weight'':
- ''bold'' } will make the labels bold.'
- category: Legend
- tags:
- - legend
- examples:
- - border
- - customLabel
- - noise
- - styled-chart-labels
- - range-selector
- - temperature-sf-ny
-
-- name: labelsDivWidth
- type: Integer
- default: 250
- desc: Width (in pixels) of the div which shows information on the currently-highlighted points.
- category: Legend
- tags:
- - legend
- examples:
- - customLabel
- - noise
-
-- name: labelsSeparateLines
- type: Boolean
- default: false
- desc: Put <br/> between lines in the label string. Often used in conjunction with labelsDiv.
- category: Legend
- tags:
- - legend
- examples:
- - century-scale
- - customLabel
- - demo
- - reverse-y-axis
-
-- name: labelsShowZeroValues
- type: Boolean
- default: true
- desc: Show zero value labels in the labelsDiv.
- category: Legend
- tags:
- - legend
- examples:
- - label-div
-
-- name: legend
- type: String
- default: onmouseover
- desc: When to display the legend. By default, it only appears when a user mouses over the chart. Set
- it to "always" to always display a legend of some sort.
- category: Legend
- tags:
- - legend
- examples:
- - demo
- - noise
- - per-series
- - styled-chart-labels
- - multi-scale
- - range-selector
- - temperature-sf-ny
-
-- name: showLabelsOnHighlight
- type: Boolean
- default: true
- desc: Whether to show the legend upon mouseover.
- category: Legend
- tags:
- - legend
- - interactive elements
- examples:
- - callback
-
-- name: rightGap
- type: Integer
- default: 5
- desc: Number of pixels to leave blank at the right edge of the Dygraph. This makes it easier to highlight
- the right-most data point.
- category: Overall display
- tags:
- - overall display
-
-- name: rollPeriod
- type: Integer >= 1
- default: 1
- desc: Number of days over which to average data. Discussed extensively above.
- category: Rolling Averages
- tags:
- - rolling averages
- - error bars
- examples:
- - annotation
- - callback
- - century-scale
- - crosshair
- - customLabel
- - draw-points
- - dygraph-many-points-benchmark
- - grid_dot
- - link-interaction
- - missing-data
- - resize
- - no-visibility
- - noise
- - perf
- - reverse-y-axis
- - unboxed-spark
- - spacing
- - styled-chart-labels
- - synchronize
- - two-series
- - underlay-callback
- - visibility
- - range-selector
- - temperature-sf-ny
-
-- name: showRoller
- type: Boolean
- default: false
- desc: If the rolling average period text box should be shown.
- category: Rolling Averages
- tags:
- - rolling averages
- - interactive elements
- examples:
- - annotation
- - callback
- - crosshair
- - dynamic-update
- - fractions
- - isolated-points
- - missing-data
- - numeric-gviz
- - steps
- - underlay-callback
- - range-selector
- - temperature-sf-ny
-
-- name: digitsAfterDecimal
- type: Integer
- default: 2
- desc: Unless it's run in scientific mode (see the sigFigs option), dygraphs displays numbers with
- digitsAfterDecimal digits after the decimal point. Trailing zeros are not displayed, so with a
- value of 2 you'll get '0', '0.1', '0.12', '123.45' but not '123.456' (it will be rounded to '123.46').
- Numbers with absolute value less than 0.1^digitsAfterDecimal (i.e. those which would show up as
- '0.00') will be displayed in scientific notation.
- category: Value display/formatting
- tags:
- - value display/formatting
- examples:
- - number-display
-
-- name: labelsKMB
- type: Boolean
- default: false
- desc: Show K/M/B for thousands/millions/billions on y-axis.
- category: Value display/formatting
- tags:
- - value display/formatting
- examples:
- - annotation-gviz
- - century-scale
- - demo
- - labelsKMB
- - no-range
- - two-axes
- - reverse-y-axis
- - two-axes-vr
-
-- name: labelsKMG2
- type: Boolean
- default: false
- desc: Show k/M/G for kilo/Mega/Giga on y-axis. This is different than labelsKMB in that it uses base
- 2, not 10.
- category: Value display/formatting
- tags:
- - value display/formatting
- examples:
- - labelsKMB
-
-- name: maxNumberWidth
- type: Integer
- default: 6
- desc: When displaying numbers in normal (not scientific) mode, large numbers will be displayed with
- many trailing zeros (e.g. 100000000 instead of 1e9). This can lead to unwieldy y-axis labels.
- If there are more than maxNumberWidth digits to the left of the decimal in a number, dygraphs
- will switch to scientific notation, even when not operating in scientific mode. If you'd like
- to see all those digits, set this to something large, like 20 or 30.
- category: Value display/formatting
- tags:
- - value display/formatting
- examples:
- - number-display
-
-- name: sigFigs
- type: Integer
- default: null
- desc: By default, dygraphs displays numbers with a fixed number of digits after the decimal point.
- If you'd prefer to have a fixed number of significant figures, set this option to that number
- of sig figs. A value of 2, for instance, would cause 1 to be display as 1.0 and 1234 to be displayed
- as 1.23e+3.
- category: Value display/formatting
- tags:
- - value display/formatting
- examples:
- - number-display
-
-- name: valueFormatter
- type: function(num or millis, opts, dygraph)
- default: null
- desc: Function to provide a custom display format for the values displayed on mouseover. This does
- not affect the values that appear on tick marks next to the axes. To format those, see axisLabelFormatter.
- This is usually set on a per-axis basis. For date axes, you can call new Date(millis) to get a
- Date object. opts is a function you can call to access various options (e.g. opts('labelsKMB')). Default
- formatter will depend on the type of your data.
- category: Value display/formatting
- tags:
- - value display/formatting
- - legend
- examples:
- - y-axis-formatter
- - value-axis-formatters
-
-- name: isZoomedIgnoreProgrammaticZoom
- type: Boolean
- default: false
- desc: When this option is passed to updateOptions() along with either the dateWindow or valueRange
- options, the zoom flags are not changed to reflect a zoomed state. This is primarily useful for
- when the display area of a chart is changed programmatically and also where manual zooming is
- allowed and use is made of the isZoomed method to determine this.
- category: Zooming
- tags:
- - zooming
- examples:
- - is-zoomed-ignore-programmatic-zoom
projects / limn.git / commitdiff