--- /dev/null
+
+- name: dateWindow
+ tags:
+ - interactivity
+ - axes
+ type: Array of two Dates or numbers
+ default: null
+ desc: Initially zoom in on a section of the graph. Is of the form [earliest, latest],
+ where earliest/latest are milliseconds since epoch. If the data for the x-axis
+ is numeric, the values in dateWindow must also be numbers. By default, the
+ full range of the input is shown.
+ examples:
+ - dateWindow
+ - drawing
+ - is-zoomed-ignore-programmatic-zoom
+ - link-interaction
+ - synchronize
+ - zoom
+
+- name: visibility
+ tags:
+ - lines
+ - data
+ - display
+ - graph
+ type: Array of booleans
+ default: null
+ desc: Which series should initially be visible? Once the Dygraph has been constructed,
+ you can access and modify the visibility of each series using the visibility
+ and setVisibility methods.
+ examples:
+ - color-visibility
+ - no-visibility
+ - visibility
+
+- name: strokeWidth
+ tags:
+ - lines
+ - data
+ - display
+ - line
+ - standard
+ type: Integer
+ default: 1
+ desc: The width of the lines connecting data points. This can be used to increase
+ the contrast or some graphs.
+ examples:
+ - linear-regression-addseries
+ - drawing
+ - grid_dot
+ - layout-options
+ - linear-regression-fractions
+ - linear-regression
+ - per-series
+ - unboxed-spark
+ - styled-chart-labels
+
+- name: drawPoints
+ tags:
+ - lines
+ - points
+ - data
+ - display
+ - standard
+ type: Boolean
+ default: false
+ desc: Draw a small dot at each point, in addition to a line going through the
+ point. This makes the individual data points easier to see, but can increase
+ visual clutter in the chart.
+ examples:
+ - linear-regression-addseries
+ - draw-points
+ - dynamic-update
+ - independent-series
+ - interaction
+ - linear-regression-fractions
+ - linear-regression
+ - per-series
+
+- name: pointSize
+ tags:
+ - lines
+ - data
+ - display
+ - points
+ - standard
+ type: Integer
+ default: 1
+ desc: The size of the dot to draw on each point in pixels (see drawPoints). A
+ dot is always drawn when a point is "isolated", i.e. there is a missing point
+ on either side of it. This also controls the size of those dots.
+ examples:
+ - per-series
+
+- name: stackedGraph
+ tags:
+ - lines
+ - data
+ - display
+ - graph
+ - standard
+ type: Boolean
+ default: false
+ desc: If set, stack series on top of one another rather than drawing them independently.
+ examples:
+ - stacked
+
+- name: fillGraph
+ tags:
+ - lines
+ - data
+ - display
+ - graph
+ - standard
+ type: Boolean
+ default: false
+ desc: Should the area underneath the graph be filled? This option is not compatible
+ with error bars.
+ examples:
+ - fillGraph
+ - two-axes
+ - steps
+
+- name: strokePattern
+ tags:
+ - lines
+ - data
+ - display
+ type: Array
+ default: null
+ desc: A custom pattern array where the even index is a draw and odd is a space
+ in pixels. If null then it draws a solid line. The array should have a even
+ length as any odd lengthed array could be expressed as a smaller even length
+ array.
+ examples:
+ - per-series
+
+- name: stepPlot
+ tags:
+ - lines
+ - data
+ - display
+ - graph
+ - standard
+ type: Boolean
+ default: false
+ desc: When set, display the graph as a step plot instead of a line plot.
+ examples:
+ - avoidMinZero
+ - steps
+ - y-axis-formatter
+
+- name: connectSeparatedPoints
+ tags:
+ - lines
+ - points
+ - data
+ - display
+ type: Boolean
+ default: false
+ desc: Usually, when Dygraphs encounters a missing value in a data series, it interprets
+ this as a gap and draws it as such. If, instead, the missing values represents
+ an x-value for which only a different series has data, then you'll want to
+ connect the dots by setting this to true. To explicitly include a gap with
+ this option set, use a value of NaN.
+ examples:
+ - connect-separated
+ - independent-series
+
+- name: rightGap
+ tags:
+ - display
+ - data
+ - lines
+ - points
+ - graph
+ type: Integer
+ default: 5
+ desc: Number of pixels to leave blank at the right edge of the Dygraph. This makes
+ it easier to highlight the right-most data point.
+
+- name: colors
+ tags:
+ - color
+ - data
+ - display
+ type: Array
+ default: null
+ desc: List of colors for the data series. These can be of the form "#AABBCC" or
+ "rgb(255,100,200)" or "yellow", etc. If not specified, equally-spaced points
+ around a color wheel are used.
+ examples:
+ - century-scale
+ - color-visibility
+ - demo
+ - reverse-y-axis
+ - color-cycle
+
+- name: colorSaturation
+ tags:
+ - color
+ - data
+ - display
+ type: Float (0.0 - 1.0)
+ default: 1.0
+ desc: If colors is not specified, saturation of the automatically-generated data
+ series colors.
+
+- name: colorValue
+ tags:
+ - color
+ - data
+ - display
+ type: Float (0.0 - 1.0)
+ default: 0.5
+ desc: If colors is not specified, value of the data series colors, as in hue/saturation/value.
+ (0.0-1.0, default 0.5)
+
+- name: animatedZooms
+ tags:
+ - interactivity
+ - zoom
+ type: Boolean
+ default: false
+ desc: Set this option to animate the transition between zoom windows. Applies
+ to programmatic and interactive zooms. Note that if you also set a drawCallback,
+ it will be called several times on each zoom. If you set a zoomCallback, it
+ will only be called after the animation is complete.
+ examples:
+ - highlighted-region
+ - link-interaction
+
+- name: highlightCircleSize
+ tags:
+ - interactivity
+ - graph
+ type: Integer
+ default: 3
+ desc: The size in pixels of the dot drawn over highlighted points.
+ examples:
+ - dygraph-many-points-benchmark
+ - grid_dot
+ - per-series
+ - unboxed-spark
+
+- name: interactionModel
+ ignore: true
+ tags:
+ - interactivity
+ type: Object
+ default: null
+ desc: 'TODO(konigsberg): document this'
+ examples:
+ - drawing
+ - interaction
+
+- name: isZoomedIgnoreProgrammaticZoom
+ tags:
+ - interactivity
+ - zoom
+ type: Boolean
+ default: false
+ desc: When this option is passed to updateOptions() along with either the dateWindow
+ or valueRange options, the zoom flags are not changed to reflect a zoomed
+ state. This is primarily useful for when the display area of a chart is changed
+ programmatically and also where manual zooming is allowed and use is made
+ of the isZoomed method to determine this.
+ examples:
+ - is-zoomed-ignore-programmatic-zoom
+
+- name: labels
+ tags:
+ - labels
+ - display
+ type: Array
+ default: null
+ desc: A name for each data series, including the independent (X) series. For CSV
+ files and DataTable objections, this is determined by context. For raw data,
+ this must be specified. If it is not, default values are supplied and a warning
+ is logged. By default, labels roughly follow ["X", "Y1", "Y2", ...]*
+ examples:
+ - linear-regression-addseries
+ - connect-separated
+ - drawing
+ - dygraph
+ - dygraph-many-points-benchmark
+ - dynamic-update
+ - highlighted-region
+ - independent-series
+ - isolated-points
+ - label-div
+ - link-interaction
+ - linear-regression
+ - negative
+ - missing-data
+ - native-format
+ - two-axes
+ - perf
+ - small-range-zero
+ - steps
+ - y-axis-formatter
+ - annotation-native
+ - multi-scale
+ - two-axes-vr
+ - value-axis-formatters
+
+- name: xlabel
+ tags:
+ - labels
+ - x-axis
+ - display
+ - axes
+ - standard
+ type: String
+ default: null
+ desc: Text to display below the chart's x-axis. You can supply any HTML for this
+ value, not just text. If you wish to style it using CSS, use the 'dygraph-label'
+ or 'dygraph-xlabel' classes.
+ examples:
+ - border
+ - demo
+ - styled-chart-labels
+ - multi-scale
+
+- name: ylabel
+ tags:
+ - labels
+ - y-axis
+ - display
+ - axes
+ - standard
+ type: String
+ default: null
+ desc: Text to display to the left of the chart's y-axis. You can supply any HTML
+ for this value, not just text. If you wish to style it using CSS, use the
+ 'dygraph-label' or 'dygraph-ylabel' classes. The text will be rotated 90 degrees
+ by default, so CSS rules may behave in unintuitive ways. No additional space
+ is set aside for a y-axis label. If you need more space, increase the width
+ of the y-axis tick labels using the yAxisLabelWidth option. If you need a
+ wider div for the y-axis label, either style it that way with CSS (but remember
+ that it's rotated, so width is controlled by the 'height' property) or set
+ the yLabelWidth option.
+ examples:
+ - border
+ - demo
+ - two-axes
+ - noise
+ - styled-chart-labels
+ - multi-scale
+ - range-selector
+ - temperature-sf-ny
+ - two-axes-vr
+
+- name: y2label
+ tags:
+ - labels
+ - y-axis
+ - display
+ - standard
+ type: String
+ default: null
+ desc: Text to display to the right of the chart's secondary y-axis. This label
+ is only displayed if a secondary y-axis is present. See this test for an example
+ of how to do this. The comments for the 'ylabel' option generally apply here
+ as well. This label gets a 'dygraph-y2label' instead of a 'dygraph-ylabel'
+ class.
+ examples:
+ - two-axes
+ - two-axes-vr
+
+- name: legend
+ tags:
+ - legend
+ - labels
+ - display
+ type: String
+ default: onmouseover
+ desc: When to display the legend. By default, it only appears when a user mouses
+ over the chart. Set it to "always" to always display a legend of some sort.
+ examples:
+ - demo
+ - noise
+ - per-series
+ - styled-chart-labels
+ - multi-scale
+ - range-selector
+ - temperature-sf-ny
+
+- name: labelsSeparateLines
+ tags:
+ - legend
+ - labels
+ - display
+ type: Boolean
+ default: false
+ desc: Put <br/> between lines in the label string. Often used in conjunction with
+ labelsDiv.
+ examples:
+ - century-scale
+ - customLabel
+ - demo
+ - reverse-y-axis
+
+- name: labelsShowZeroValues
+ tags:
+ - legend
+ - labels
+ - display
+ type: Boolean
+ default: true
+ desc: Show zero value labels in the labelsDiv.
+ examples:
+ - label-div
+
+- name: hideOverlayOnMouseOut
+ tags:
+ - interactivity
+ - legend
+ - labels
+ - display
+ type: Boolean
+ default: true
+ desc: Whether to hide the legend when the mouse leaves the chart area.
+ examples:
+ - gviz-selection
+
+- name: showLabelsOnHighlight
+ tags:
+ - interactivity
+ - legend
+ - labels
+ - display
+ type: Boolean
+ default: true
+ desc: Whether to show the legend upon mouseover.
+ examples:
+ - callback
+
+- name: labelsDiv
+ ignore: true
+ tags:
+ - legend
+ - labels
+ - display
+ type: DOM element or string
+ default: null
+ desc: Show data labels in an external div, rather than on the graph. This value
+ can either be a div element or a div id.
+ examples:
+ - century-scale
+ - demo
+ - label-div
+ - reverse-y-axis
+ - unboxed-spark
+
+- name: labelsDivStyles
+ ignore: true
+ tags:
+ - legend
+ - labels
+ - display
+ type: Object
+ default: null
+ desc: 'Additional styles to apply to the currently-highlighted points div. For
+ example, { ''font-weight'': ''bold'' } will make the labels bold.'
+ examples:
+ - border
+ - customLabel
+ - noise
+ - styled-chart-labels
+ - range-selector
+ - temperature-sf-ny
+
+- name: labelsDivWidth
+ ignore: true
+ tags:
+ - legend
+ - labels
+ - display
+ type: Integer
+ default: 250
+ desc: Width (in pixels) of the div which shows information on the currently-highlighted
+ points.
+ examples:
+ - customLabel
+ - noise
+
+- name: logscale
+ tags:
+ - axes
+ - y-axis
+ - display
+ - standard
+ type: Boolean
+ default: false
+ desc: When set for a y-axis, the graph shows that axis in log scale. Any values
+ less than or equal to zero are not displayed. Not compatible with showZero,
+ and ignores connectSeparatedPoints. Also, showing log scale with valueRanges
+ that are less than zero will result in an unviewable graph.
+ examples:
+ - logscale
+ - stock
+
+- name: axis
+ tags:
+ - axes
+ type: String or Object
+ default: null
+ desc: Set to either an object ({}) filled with options for this axis or to the
+ name of an existing data series with its own axis to re-use that axis. See
+ tests for usage.
+ examples:
+ - two-axes
+ - steps
+ - two-axes-vr
+ - value-axis-formatters
+
+- name: valueRange
+ tags:
+ - axes
+ - y-axis
+ - range
+ - interactivity
+ type: Array of two numbers
+ default: null
+ desc: Explicitly set the vertical range of the graph to [low, high]. This may
+ be set on a per-axis basis to define each y-axis separately. By default, the
+ full range of the input is shown.
+ examples:
+ - drawing
+ - dynamic-update
+ - is-zoomed-ignore-programmatic-zoom
+ - no-visibility
+ - reverse-y-axis
+ - synchronize
+ - zoom
+ - two-axes-vr
+
+- name: drawXAxis
+ tags:
+ - axes
+ - x-axis
+ - display
+ type: Boolean
+ default: true
+ desc: Whether to draw the x-axis. Setting this to false also prevents x-axis ticks
+ from being drawn and reclaims the space for the chart grid/lines.
+ examples:
+ - unboxed-spark
+
+- name: drawYAxis
+ tags:
+ - axes
+ - y-axis
+ - display
+ type: Boolean
+ default: true
+ desc: Whether to draw the y-axis. Setting this to false also prevents y-axis ticks
+ from being drawn and reclaims the space for the chart grid/lines.
+ examples:
+ - drawing
+ - unboxed-spark
+
+- name: avoidMinZero
+ tags:
+ - axes
+ - y-axis
+ type: Boolean
+ default: false
+ desc: "When set, the heuristic that fixes the Y axis at zero for a data set with\
+ \ the minimum Y value of zero is disabled. \nThis is particularly useful for\
+ \ data sets that contain many zero values, especially for step plots which\
+ \ may otherwise have lines not visible running along the bottom axis."
+ examples:
+ - avoidMinZero
+
+- name: includeZero
+ tags:
+ - axes
+ - y-axis
+ - display
+ type: Boolean
+ default: false
+ desc: Usually, dygraphs will use the range of the data plus some padding to set
+ the range of the y-axis. If this option is set, the y-axis will always include
+ zero, typically as the lowest value. This can be used to avoid exaggerating
+ the variance in the data
+ examples:
+ - no-range
+ - numeric-gviz
+ - small-range-zero
+
+- name: axisLineWidth
+ tags:
+ - axes
+ - stroke
+ - display
+ type: Float
+ default: 0.3
+ desc: Thickness (in pixels) of the x- and y-axis lines.
+
+- name: axisLineColor
+ tags:
+ - axes
+ - color
+ type: String
+ default: black
+ desc: Color of the x- and y-axis lines. Accepts any value which the HTML canvas
+ strokeStyle attribute understands, e.g. 'black' or 'rgb(0, 100, 255)'.
+ examples:
+ - demo
+
+- name: axisTickSize
+ tags:
+ - axes
+ type: Float
+ default: 3.0
+ desc: The size of the line to display next to each tick mark on x- or y-axes.
+
+- name: xAxisHeight
+ tags:
+ - axes
+ - x-axis
+ - display
+ type: Integer
+ default: null
+ desc: Height, in pixels, of the x-axis. If not set explicitly, this is computed
+ based on axisLabelFontSize and axisTickSize.
+
+- name: axisLabelColor
+ tags:
+ - axes
+ - color
+ - labels
+ type: String
+ default: black
+ desc: Color for x- and y-axis labels. This is a CSS color string.
+
+- name: axisLabelFontSize
+ tags:
+ - axes
+ - labels
+ - fonts
+ - standard
+ type: Integer
+ default: 14
+ desc: Size of the font (in pixels) to use in the axis labels, both x- and y-axis.
+
+- name: axisLabelFormatter
+ tags:
+ - formatting
+ - axes
+ - labels
+ type: function(number or Date, granularity, opts, dygraph)
+ default: null
+ desc: Function to call to format the tick values that appear along an axis. This
+ is usually set on a per-axis basis. The first parameter is either a number
+ (for a numeric axis) or a Date object (for a date axis). The second argument
+ specifies how fine-grained the axis is. For date axes, this is a reference
+ to the time granularity enumeration, defined in dygraph-tickers.js, e.g. Dygraph.WEEKLY.
+ opts is a function which provides access to various options on the dygraph,
+ e.g. opts('labelsKMB').
+ examples:
+ - x-axis-formatter
+ - y-axis-formatter
+ - value-axis-formatters
+
+- name: axisLabelWidth
+ tags:
+ - axes
+ - labels
+ type: Integer
+ default: 50
+ desc: Width (in pixels) of the containing divs for x- and y-axis labels. For the
+ y-axis, this also controls
+
+- name: xLabelHeight
+ tags:
+ - labels
+ - axes
+ - x-axis
+ - display
+ type: Integer
+ default: 18
+ desc: Height of the x-axis label, in pixels. This also controls the default font
+ size of the x-axis label. If you style the label on your own, this controls
+ how much space is set aside below the chart for the x-axis label's div.
+
+- name: yLabelWidth
+ tags:
+ - labels
+ - axes
+ - y-axis
+ - display
+ type: Integer
+ default: 18
+ desc: Width of the div which contains the y-axis label. Since the y-axis label
+ appears rotated 90 degrees, this actually affects the height of its div.
+
+- name: pixelsPerLabel
+ tags:
+ - axes
+ - grid
+ - labels
+ type: Integer
+ default: null
+ desc: Number of pixels to require between each x- and y-label. Larger values will
+ yield a sparser axis with fewer ticks. This is set on a per-axis basis. By
+ default, values are 60 (x-axis) or 30 (y-axes).
+ examples:
+ - value-axis-formatters
+
+- name: xAxisLabelWidth
+ tags:
+ - axes
+ - x-axis
+ - labels
+ type: Integer
+ default: 50
+ desc: Width, in pixels, of the x-axis labels.
+ examples:
+ - x-axis-formatter
+ - value-axis-formatters
+
+- name: yAxisLabelWidth
+ tags:
+ - axes
+ - y-axis
+ - labels
+ type: Integer
+ default: 50
+ desc: Width, in pixels, of the y-axis labels. This also affects the amount of
+ space available for a y-axis chart label.
+ examples:
+ - customLabel
+ - two-axes
+ - multi-scale
+ - two-axes-vr
+ - value-axis-formatters
+
+- name: ticker
+ tags:
+ - axes
+ - formatting
+ - callback
+ type: 'function(min, max, pixels, opts, dygraph, vals) -> [{v: ..., label: ...},
+ ...]'
+ default: null
+ desc: This lets you specify an arbitrary function to generate tick marks on an
+ axis. The tick marks are an array of (value, label) pairs. The built-in functions
+ go to great lengths to choose good tick marks so, if you set this option,
+ you'll most likely want to call one of them and modify the result. By default,
+ uses Dygraph.dateTicker or Dygraph.numericTicks, but see dygraph-tickers.js
+ for an extensive discussion. This is set on a per-axis basis.
+
+- name: labelsKMB
+ tags:
+ - formatting
+ - labels
+ - y-axis
+ - display
+ type: Boolean
+ default: false
+ desc: Show K/M/B for thousands/millions/billions on y-axis.
+ examples:
+ - annotation-gviz
+ - century-scale
+ - demo
+ - labelsKMB
+ - no-range
+ - two-axes
+ - reverse-y-axis
+ - two-axes-vr
+
+- name: labelsKMG2
+ tags:
+ - formatting
+ - labels
+ - y-axis
+ - display
+ type: Boolean
+ default: false
+ desc: Show k/M/G for kilo/Mega/Giga on y-axis. This is different than labelsKMB
+ in that it uses base 2, not 10.
+ examples:
+ - labels
+ - formatting
+
+- name: digitsAfterDecimal
+ tags:
+ - formatting
+ - y-axis
+ - display
+ type: Integer
+ default: 2
+ desc: Unless it's run in scientific mode (see the sigFigs option), dygraphs displays
+ numbers with digitsAfterDecimal digits after the decimal point. Trailing zeros
+ are not displayed, so with a value of 2 you'll get '0', '0.1', '0.12', '123.45'
+ but not '123.456' (it will be rounded to '123.46'). Numbers with absolute
+ value less than 0.1^digitsAfterDecimal (i.e. those which would show up as
+ '0.00') will be displayed in scientific notation.
+ examples:
+ - number-display
+
+- name: maxNumberWidth
+ tags:
+ - formatting
+ - y-axis
+ - display
+ type: Integer
+ default: 6
+ desc: When displaying numbers in normal (not scientific) mode, large numbers will
+ be displayed with many trailing zeros (e.g. 100000000 instead of 1e9). This
+ can lead to unwieldy y-axis labels. If there are more than maxNumberWidth
+ digits to the left of the decimal in a number, dygraphs will switch to scientific
+ notation, even when not operating in scientific mode. If you'd like to see
+ all those digits, set this to something large, like 20 or 30.
+ examples:
+ - number-display
+
+- name: sigFigs
+ tags:
+ - formatting
+ - y-axis
+ - display
+ type: Integer
+ default: null
+ desc: By default, dygraphs displays numbers with a fixed number of digits after
+ the decimal point. If you'd prefer to have a fixed number of significant figures,
+ set this option to that number of sig figs. A value of 2, for instance, would
+ cause 1 to be display as 1.0 and 1234 to be displayed as 1.23e+3.
+ examples:
+ - number-display
+
+- name: valueFormatter
+ tags:
+ - formatting
+ - callback
+ - labels
+ - display
+ - legend
+ type: function(num or millis, opts, dygraph)
+ default: null
+ desc: Function to provide a custom display format for the values displayed on
+ mouseover. This does not affect the values that appear on tick marks next
+ to the axes. To format those, see `axisLabelFormatter`. This is usually set
+ on a per-axis basis. For date axes, you can call new Date(millis) to get a
+ Date object. opts is a function you can call to access various options (e.g.
+ opts('labelsKMB')). Default formatter will depend on the type of your data.
+ examples:
+ - y-axis-formatter
+ - value-axis-formatters
+
+- name: title
+ ignore: true
+ tags:
+ - labels
+ - title
+ - display
+ - chart
+ - standard
+ type: String
+ default: null
+ desc: Text to display above the chart. You can supply any HTML for this value,
+ not just text. If you wish to style it using CSS, use the 'dygraph-label'
+ or 'dygraph-title' classes.
+ examples:
+ - border
+ - demo
+ - noise
+ - styled-chart-labels
+ - multi-scale
+ - range-selector
+ - temperature-sf-ny
+
+- name: titleHeight
+ ignore: true
+ tags:
+ - labels
+ - display
+ - title
+ - fonts
+ - chart
+ type: Integer
+ default: 18
+ desc: Height of the chart title, in pixels. This also controls the default font
+ size of the title. If you style the title on your own, this controls how much
+ space is set aside above the chart for the title's div.
+ examples:
+ - styled-chart-labels
+
+- name: showRoller
+ tags:
+ - statistics
+ - interactivity
+ - rolling averages
+ - summary data
+ type: Boolean
+ default: false
+ desc: If the rolling average period text box should be shown.
+ examples:
+ - annotation
+ - callback
+ - crosshair
+ - dynamic-update
+ - fractions
+ - isolated-points
+ - missing-data
+ - numeric-gviz
+ - steps
+ - underlay-callback
+ - range-selector
+ - temperature-sf-ny
+
+- name: rollPeriod
+ tags:
+ - statistics
+ - rolling averages
+ - error bars
+ - summary data
+ type: Integer >= 1
+ default: 1
+ desc: Number of days over which to average data. Discussed extensively above.
+ examples:
+ - annotation
+ - callback
+ - century-scale
+ - crosshair
+ - customLabel
+ - draw-points
+ - dygraph-many-points-benchmark
+ - grid_dot
+ - link-interaction
+ - missing-data
+ - resize
+ - no-visibility
+ - noise
+ - perf
+ - reverse-y-axis
+ - unboxed-spark
+ - spacing
+ - styled-chart-labels
+ - synchronize
+ - two-series
+ - underlay-callback
+ - visibility
+ - range-selector
+ - temperature-sf-ny
+
+- name: sigma
+ tags:
+ - statistics
+ - error bars
+ - summary data
+ type: Float
+ default: 2.0
+ desc: When errorBars is set, shade this many standard deviations above/below each
+ point.
+
+- name: wilsonInterval
+ tags:
+ - statistics
+ - error bars
+ - summary data
+ type: Boolean
+ default: true
+ desc: Use in conjunction with the "fractions" option. Instead of plotting +/-
+ N standard deviations, dygraphs will compute a Wilson confidence interval
+ and plot that. This has more reasonable behavior for ratios close to 0 or
+ 1.
+
+- name: fillAlpha
+ tags:
+ - statistics
+ - error bars
+ - color
+ - data
+ - display
+ - summary data
+ type: Float (0.0 - 1.0)
+ default: 0.15
+ desc: Error bars (or custom bars) for each series are drawn in the same color
+ as the series, but with partial transparency. This sets the transparency.
+ A value of 0.0 means that the error bars will not be drawn, whereas a value
+ of 1.0 means that the error bars will be as dark as the line for the series
+ itself. This can be used to produce chart lines whose thickness varies at
+ each point.
+
+- name: customBars
+ tags:
+ - statistics
+ - source
+ - error bars
+ - csv
+ - parsing
+ - summary data
+ type: Boolean
+ default: false
+ desc: When set, parse each CSV cell as "low;middle;high". Error bars will be drawn
+ for each point between low and high, with the series itself going through
+ middle.
+ examples:
+ - custom-bars
+ - zero-series
+ - stock
+ - range-selector
+ - temperature-sf-ny
+
+- name: errorBars
+ tags:
+ - statistics
+ - source
+ - error bars
+ - csv
+ - parsing
+ - summary data
+ type: Boolean
+ default: false
+ desc: Does the data contain standard deviations? Setting this to true alters the
+ input format (see above).
+ examples:
+ - callback
+ - crosshair
+ - custom-bars
+ - customLabel
+ - draw-points
+ - fillGraph
+ - fractions
+ - grid_dot
+ - interaction
+ - is-zoomed-ignore-programmatic-zoom
+ - link-interaction
+ - linear-regression-fractions
+ - missing-data
+ - resize
+ - no-visibility
+ - noise
+ - numeric-gviz
+ - perf
+ - steps
+ - synchronize
+ - underlay-callback
+ - visibility
+ - zoom
+
+- name: fractions
+ tags:
+ - statistics
+ - source
+ - error bars
+ - csv
+ - parsing
+ - summary data
+ type: Boolean
+ default: false
+ desc: When set, attempt to parse each cell in the CSV file as "a/b", where a and
+ b are integers. The ratio will be plotted. This allows computation of Wilson
+ confidence intervals (see below).
+ examples:
+ - fractions
+ - linear-regression-fractions
+
+- name: delimiter
+ tags:
+ - source
+ - csv
+ type: String
+ default: ','
+ desc: The delimiter to look for when separating fields of a CSV file. Setting
+ this to a tab is not usually necessary, since tab-delimited data is auto-detected.
+
+- name: xValueParser
+ tags:
+ - source
+ - csv
+ - x-axis
+ type: function(str) -> number
+ default: null
+ desc: "A function which parses x-values (i.e. the dependent series). Must return
+ a number, even when the values are dates. In this case, millis since epoch
+ are used. This is used primarily for parsing CSV data. \n\n * Dygraphs is
+ slightly more accepting in the dates which it will parse."
+
+- name: drawXGrid
+ tags:
+ - grid
+ - x-axis
+ - standard
+ type: Boolean
+ default: true
+ desc: Whether to display vertical gridlines under the chart.
+ examples:
+ - demo
+ - unboxed-spark
+
+- name: drawYGrid
+ tags:
+ - grid
+ - y-axis
+ - standard
+ type: Boolean
+ default: true
+ desc: Whether to display horizontal gridlines under the chart.
+ examples:
+ - drawing
+ - unboxed-spark
+
+- name: gridLineColor
+ tags:
+ - grid
+ - color
+ - lines
+ - graph
+ type: String
+ default: rgb(128,128,128)
+ desc: The color of the gridlines. This can be of the form "#AABBCC" or "rgb(255,100,200)"
+ or "yellow".
+ examples:
+ - drawing
+ - grid_dot
+
+- name: gridLineWidth
+ tags:
+ - grid
+ - stroke
+ - graph
+ type: Float
+ default: 0.3
+ desc: Thickness (in pixels) of the gridlines drawn under the chart. The vertical/horizontal
+ gridlines can be turned off entirely by using the drawXGrid and drawYGrid
+ options.
+
+- name: showRangeSelector
+ tags:
+ - range
+ - interactivity
+ - graph
+ type: Boolean
+ default: false
+ desc: Show the range selector widget. This option can only be specified at Dygraph
+ creation time.
+ examples:
+ - range-selector
+
+- name: rangeSelectorHeight
+ tags:
+ - range
+ - interactivity
+ - graph
+ type: Integer
+ default: 40
+ desc: Height, in pixels, of the range selector widget. This option can only be
+ specified at Dygraph creation time.
+ examples:
+ - range-selector
+
+- name: rangeSelectorPlotFillColor
+ tags:
+ - range
+ - interactivity
+ - color
+ - graph
+ type: String
+ default: '#A7B1C4'
+ desc: The range selector mini plot fill color. This can be of the form "#AABBCC"
+ or "rgb(255,100,200)" or "yellow". You can also specify null or "" to turn
+ off fill.
+ examples:
+ - range-selector
+
+- name: rangeSelectorPlotStrokeColor
+ tags:
+ - range
+ - interactivity
+ - color
+ - graph
+ type: String
+ default: '#808FAB'
+ desc: The range selector mini plot stroke color. This can be of the form "#AABBCC"
+ or "rgb(255,100,200)" or "yellow". You can also specify null or "" to turn
+ off stroke.
+ examples:
+ - range-selector
+
+- name: panEdgeFraction
+ tags:
+ - interactivity
+ - axes
+ - pan
+ - graph
+ type: Float
+ default: null
+ desc: A value representing the farthest a graph may be panned, in percent of the
+ display. For example, a value of 0.1 means that the graph can only be panned
+ 10% pased the edges of the displayed values. null means no bounds.
+ examples:
+ - zoom
+
+- name: displayAnnotations
+ tags:
+ - annotations
+ - display
+ - data
+ type: Boolean
+ default: false
+ desc: Only applies when Dygraphs is used as a GViz chart. Causes string columns
+ following a data series to be interpreted as annotations on points in that
+ series. This is the same format used by Google's AnnotatedTimeLine chart.
+ examples:
+ - annotation-gviz
+
+- name: annotationClickHandler
+ tags:
+ - annotations
+ - callback
+ type: function(annotation, point, dygraph, event)
+ default: null
+ desc: If provided, this function is called whenever the user clicks on an annotation.
+ examples:
+ - annotation
+
+- name: annotationDblClickHandler
+ tags:
+ - annotations
+ - callback
+ type: function(annotation, point, dygraph, event)
+ default: null
+ desc: If provided, this function is called whenever the user double-clicks on
+ an annotation.
+ examples:
+ - annotation
+
+- name: annotationMouseOutHandler
+ tags:
+ - annotations
+ - callback
+ type: function(annotation, point, dygraph, event)
+ default: null
+ desc: If provided, this function is called whenever the user mouses out of an
+ annotation.
+ examples:
+ - annotation
+
+- name: annotationMouseOverHandler
+ tags:
+ - annotations
+ - callback
+ type: function(annotation, point, dygraph, event)
+ default: null
+ desc: If provided, this function is called whenever the user mouses over an annotation.
+ examples:
+ - annotation
+
+- name: timingName
+ tags:
+ - debugging
+ type: String
+ default: null
+ desc: Set this option to log timing information. The value of the option will
+ be logged along with the timing, so that you can distinguish multiple dygraphs
+ on the same page.
+ examples:
+ - dygraph-many-points-benchmark
+
+- name: clickCallback
+ tags:
+ - callback
+ type: function(e, x, points)
+ default: null
+ desc: "A function to call when the canvas is clicked. The function should take\
+ \ three arguments, the event object for the click, the x-value that was clicked\
+ \ (for dates this is millis since epoch), and the closest points along that\
+ \ date. The points have these properties:\n * xval/yval: The data coordinates\
+ \ of the point (with dates/times as millis since epoch) \n * canvasx/canvasy:\
+ \ The canvas coordinates at which the point is drawn. \n name: The name of\
+ \ the data series to which the point belongs"
+ examples:
+ - callback
+
+- name: drawCallback
+ tags:
+ - callback
+ type: function(dygraph, is_initial)
+ default: null
+ desc: When set, this callback gets called every time the dygraph is drawn. This
+ includes the initial draw, after zooming and repeatedly while panning. The
+ first parameter is the dygraph being drawn. The second is a boolean value
+ indicating whether this is the initial draw.
+ examples:
+ - linear-regression-addseries
+ - annotation
+ - callback
+ - is-zoomed
+ - is-zoomed-ignore-programmatic-zoom
+ - synchronize
+ - zoom
+
+- name: highlightCallback
+ tags:
+ - callback
+ type: function(event, x, points,row)
+ default: null
+ desc: 'When set, this callback gets called every time a new point is highlighted.
+ The parameters are the JavaScript mousemove event, the x-coordinate of the
+ highlighted points and an array of highlighted points: [ {name: ''series'',
+ yval: y-value}, ... ]'
+ examples:
+ - callback
+ - crosshair
+
+- name: underlayCallback
+ tags:
+ - callback
+ type: function(canvas, area, dygraph)
+ default: null
+ desc: When set, this callback gets called before the chart is drawn. It details
+ on how to use this.
+ examples:
+ - highlighted-region
+ - interaction
+ - linear-regression-fractions
+ - linear-regression
+ - underlay-callback
+
+- name: unhighlightCallback
+ tags:
+ - callback
+ type: function(event)
+ default: null
+ desc: When set, this callback gets called every time the user stops highlighting
+ any point by mousing out of the graph. The parameter is the mouseout event.
+ examples:
+ - callback
+ - crosshair
+
+- name: zoomCallback
+ tags:
+ - callback
+ - interactivity
+ - zoom
+ type: function(minDate, maxDate, yRanges)
+ default: null
+ desc: A function to call when the zoom window is changed (either by zooming in
+ or out). minDate and maxDate are milliseconds since epoch. yRanges is an array
+ of [bottom, top] pairs, one for each y-axis.
+ examples:
+ - callback
+ - is-zoomed-ignore-programmatic-zoom
+ - zoom
+
+- name: pointClickCallback
+ tags:
+ - callback
+ - interactivity
+ type: function(e, point)
+ default: null
+ desc: "A function to call when a data point is clicked. The function should take
+ two arguments, the event object for the click, and the point that was clicked.
+ The 'point' argument has these properties:\n * xval/yval: The data coordinates
+ of the point (with dates/times as millis since epoch) \n * canvasx/canvasy:
+ The canvas coordinates at which the point is drawn. \n * name: The name of
+ the data series to which the point belongs."
+ examples:
+ - annotation
+ - callback
+
+- name: pixelsPerXLabel
+ tags:
+ - deprecated
+ - labels
+ - x-axis
+ type: Integer
+ default: null
+ desc: 'Prefer axes { x: { pixelsPerLabel } }'
+
+- name: pixelsPerYLabel
+ tags:
+ - deprecated
+ - labels
+ - y-axis
+ type: Integer
+ default: null
+ desc: 'Prefer axes: { y: { pixelsPerLabel } }'
+ examples:
+ - spacing
+
+- name: xAxisLabelFormatter
+ tags:
+ - deprecated
+ - labels
+ - x-axis
+ type: function
+ default: null
+ desc: 'Prefer axes { x: { axisLabelFormatter } }'
+
+- name: xValueFormatter
+ tags:
+ - deprecated
+ - x-axis
+ type: function
+ default: null
+ desc: 'Prefer axes: { x: { valueFormatter } }'
+
+- name: yAxisLabelFormatter
+ tags:
+ - deprecated
+ - labels
+ - y-axis
+ type: function
+ default: null
+ desc: 'Prefer axes: { y: { axisLabelFormatter } }'
+
+- name: yValueFormatter
+ tags:
+ - deprecated
+ - y-axis
+ type: function
+ default: null
+ desc: 'Prefer axes: { y: { valueFormatter } }'
+ examples:
+ - labelsKMB
+ - multi-scale
+
+
+- name: width
+ ignore: true
+ tags:
+ - display
+ - graph
+ type: Integer
+ default: 480
+ desc: Width, in pixels, of the chart. If the container div has been explicitly
+ sized, this will be ignored.
+
+- name: height
+ ignore: true
+ tags:
+ - display
+ - graph
+ type: Integer
+ default: 320
+ desc: Height, in pixels, of the chart. If the container div has been explicitly
+ sized, this will be ignored.
+
+- name: file
+ ignore: true
+ tags:
+ - source
+ - data
+ type: String
+ default: null
+ desc: Sets the data being displayed in the chart. This can only be set when calling
+ updateOptions; it cannot be set from the constructor. For a full description
+ of valid data formats, see the Data Formats page. String can be a URL of CSV
+ or CSV, GViz DataTable or 2D Array.
projects / limn.git / commitdiff